Developed based on PA12; low water absorption, the size of printed parts is less affected by humidity and temperature. ePA12 has high toughness, and high impact resistance, and can be used to print durable parts; it has up to 165% elongation at break and excellent fatigue resistance; self-lubricating wear resistance can print mechanical gears; high-temperature resistance, and thermal deformation The temperature is 100℃, can be used for temperature-resistant parts; low shrinkage, not easy to warp and crack during printing.
Selling point
Low moisture absorption
Heat resistance
High toughness
High impact resistance
Abrasion resistance
High dimensional stability
Excellent printability
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePA12 |
| Density(g/cm3) | 1.012 |
| Heat Distortion Temp(℃,0.45MPa) | 100 |
| Melt Flow Index(g/10min) | 55.64(270℃/2.16kg) |
| Tensile Strength(MPa) | 50.81 |
| Elongation at Break(%) | 165.41 |
| Flexural Strength(MPa) | 47.27 |
| Flexural Modulus(MPa) | 659.49 |
| IZOD Impact Strength(kJ/㎡) | 10.14 |
| Durability | 10/10 |
| Printability | 8/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 260 – 290℃ Recommended temperature：280℃ |
| Bed temperature(℃) | 70 – 90°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Solid glue, PEI |
Note:
ePA12 needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.
Reviews
There are no reviews yet.